Atmospheric Pressure Plasma Systems (Plasma Cleaner)
| Specifications |
|
Supply Unit
|
W 300 mm, H 200 mm, D 300 mm, weight 20 kg
|
|
Plasma Generator
|
L 210 mm, diam. 32 mm, weight 0.5 kg
|
|
Generator
|
Frequency: 40 kHz, power: 300 W, treatment width: 8 – 10 mm (depending on surface properties and process parameters)
|
|
Process and Cooling Gas
|
Dry and oil-free compressed air; 5 bar, approx. 2 m3/h (are made available externally)
|
|
Operation and Controls
|
Semi-automated mode via SUB-D connector at the rear panel (switches plasma on and off).
Automatic process monitoring by the integrated performance control.
|
|
Flexible Supply Line
|
PVC protective tube diam. 19 mm, L 3 m, bending radius 100 mm
|
|
Intermediate Transformer
|
- W 205 mm, H 235 mm, D 115 mm
- 6 m connecting cable between supply unit and transformer
|
|
Connections
|
- Supply voltage: 230 V, 50/60 Hz
- Controls: SUB-D bushing 25-pole
- Process and cooling gas: dry, oil-free compressed air
|
|
Fields of Application
|
- Automotive
- Electrical engineering
- Elastomer technology
- Research and development
- Packaging technology
- Plastics technology
- Medical engineering
- Optics
- Solar cell and battery manufacturing technology
- Robot applications
- Integration in existing production lines
- In connection with fully automated production line
|
|
Additional Options
|
Plasma nozzle long:
- Ø 5 mm; length 28 mm (incl. thread)
Compressed air filter with additional microfilter:
- Kit designation: AF20-F01 / AFM20-F01
Test inks
- Test ink for easy analysis of the surface tension
- The kit comprises 28, 38, 48, 56, 64, 72 and 105 mN/m
Longer flexible supply lines:
PVC protective tube
- 19mm in diameter
- Length: 3 m + 5 m (with transformer in the middle)
- Transformer weight: approx. 5 kg
- Transformer dimensions: L 230 mm x W 200 mm x H 110 mm
Indicator labels for atmospheric pressure plasma:
- Comprises 9 labels per sheet
- For checking the success of the plasma treatment
Plasma jet monitoring via LDR measurement incl. air purging:
- 2 light sensors (1 x plasma light signal, 1 x reference light)
- Digital output
- Signal evaluation electronics not installed in the PlasmaBeam housing (separate housing required due to EMC)
- Error message from the evaluation electronics is switched in series with the Plasma On signal
- The measuring head (with 2 sensors) must be installed at the same height as the nozzle
- Incl. air purging
- One monitoring per nozzle is required
|
