LRES2014PT-POE

PCIe x4 Dual-port 10G POE+ Ethernet Frame Grabber Card (Intel X550)

LRES2014PT-POE

LRES2014PT-POE LRES2014PT-POE LRES2014PT-POE LRES2014PT-POE LRES2014PT-POE
 

Key Features

  • The single port PoE output power consumption is up to 30W.
  • Self-adaptive power consumption output required by external equipment: Class 0, Class 1, Class 2, Class 3, Class 4;
  • The adapter card uses a wider RJ45 pitch design;
  • Increase the independent PoE switch, and each port is equipped with surge protection;
  • Increased high-efficiency cooling fan, fan speed 4000PRM, life of 50,000 hours;
  • Larger heat sink can effectively solve the problem of adapter heat dissipation in the case of poor heat dissipation environment, and effectively guarantee the stable operation of the adapter card for a long time;
  • Carefully selected RJ5 connectors with thickened and heavy gold to ensure more firm and reliable connectivity;
  • The design of two 8-Pin RJ45 headers can better save the precious PCIe slot resources of the motherboard.

Introduction

LRES2014PT-POE is a dual-port copper cable 10 Gigabit Ethernet PCI Express x4 PoE+ Ethernet image acquisition card independently developed by Shenzhen Lianrui Electronics Co., Ltd. based on the Inetl master control solution, and is compatible with PCIe x8 and x16 channels. The server adapter card design is mainly designed for industrial field visual inspection servers and equipment, visual field clients, fast mobile Ethernet data transmission equipment, etc., and is also suitable for ordinary servers.

This adapter card has integrated hardware acceleration function and can perform TCP/UDP/IP checksum offload and TCP segmentation tasks. The host processing technology can offload the accelerator, and the host processing technology can offload the accelerator, freeing up CPU resources to free up more CPU resources to process other applications. This adapter card is an ideal solution for deploying multiple networks and deploying critical network applications and environments on high-performance servers.

LRES2014PT-POE was developed on the basis of the Intel dual-port Ethernet MAC+PHY (Media Access Controller and Physical Interface Transceiver) controller, which can allow two ports to be fully dual at the same time when the highest 10G Ethernet connection The work mode of the worker works to adapt to high-performance network communication, and at the same time, it can also expand the bandwidth through link aggregation and save PCI Express channel resources, while not occupying the bus bandwidth.


Specifications

Features
Controller Intel chip
Transmission Medium Copper
Copper Type Cat 6 & Cat 7 or higher, 10000Base-T up to 100m (POE power min requirement Cat5)
Cat 5E & Cat 6 or higher, 100Base-T / 1000Base-T up to 100m (POE power min requirement Cat5)
Baffle Height Full-height bracket
Power Consumption 8.0W
PoE Power (max) 30W / port
I/O Input (DC) +12V ~ +24V
PoE Voltage 48V
OS Support Windows 7 / 8 / 8.1 / 10
Windows Server 2008 R2 / 2012 R2 / 2016 R2 /2019 R2
Linux Stable Kernel version 2.6.x / 3.x / 4.x or later
Linux CentOS/RHEL 6.5 / 7.x or later
Ubuntu 14.x / 15.x / 16.x or later
VMware ESX/ESXi 4.x / 5.x / 6.x or later
Bus Type PCIe v3.0 x4,compatible with x8 , x16
Data Rate Per Port 100/1000/10000 Mbps
Connector 2*10G RJ45 Connector
Power Supply PCIe
Technical Features
Standards Compliant IEEE802.3at -2009 PoE standard
IEEE802.3af -2003 PoE standard
IEEE 802.3an 10GBASE-T Ethernet
IEEE 802.3ab 1000BASE-T Gigabit Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3z
IEEE 802.1Q VLANs
IEEE 802.3x
IEEE 1588
IEEE 802.3az – Energy Efficient Ethernet (EEE)
iSCSI No
WoL No
Jumbo Frames Yes
DPDK Yes
PXE No
FCoE No
PCI-SIG/SR-IOV Yes