Matrox Solios eA/XA



The Matrox Solios eA/XA frame grabber strikes a perfect balance between functionality and cost. Its high fidelity analog acquisition capabilities and high-performance PCI Express® (PCIe®) or PCI-X® bus interface make the Matrox Solios eA/XA a good match for mainstream cameras and the right choice for cost sensitive applications.


  • PCIe x1 or PCIe x4 card.
  • Up to four fully independent inputs.
  • 10-bit A/D converters.
  • Sampling rate up to 65 MHz.
  • Video synchronization and PLL lock detection.
  • 64 MB acquisition buffer.
  • Serial communication ports mapped as PC COM ports.
  • Programmed using Matrox Imaging Library (MIL) sold separately.
  • Supports 32-bit Windows® XP, 32/64-bit Windows 7/8(.1) and 32/64-bit Linux®.

PCIe® x1 or x4 card, or PCI/PCI-X® card with universal 64-bit card edge
connector (64-bit 33/66 MHz 5V/3.3V PCI and 64-bit 66/100/133 MHz PCI-X®)
64MB of 83/100 MHz DDR SDRAM for acquisition
Up to four independent analog video inputs with
– 2:1 mux
– AC coupling
– selectable low pass filter: 7.5 MHz or 33 MHz
– variable gain amplifier and adjustable references
– 10-bit A/D with sampling rate up to 65 MHz
– SNR of 55.6 dB
– pixel jitter of ±2.3ns
– video synchronization and PLL lock detection
– 1K x 10-bit LUT
– LVDS/TTL pixel clock, hsync/csync, and vsync inputs
or outputs
– TTL trigger input and exposure output
– serial communication port mapped as PC COM port
Inputs can be combined to acquire from
– component RGB source
– two dual-output monochrome video sources
Supports frame and line-scan video sources
Eight TTL/LVDS configurable auxiliary inputs
Eight TTL/LVDS configurable auxiliary outputs
Four opto-isolated configurable auxiliary inputs
PROM for storing calibration parameters


Ordering Information

Model Description
SOL 6M 4A* Analog PCI-X® frame grabber with four independent inputs, 64 MB DDR SDRAM and cable
adapter board (LVDS aux. I/O).
SOL 6M 1A* Analog PCI-X® frame grabber with single input, 64 MB DDR SDRAM and cable adapter board (LVDS aux. I/O).
SOL 6M 4A E* Analog PCIe® x4 frame grabber with four independent inputs, 64 MB DDR SDRAM and cable adapter board (LVDS aux. I/O).
SOL 6M 1A* Analog PCIe® x1 frame grabber with single input, 64 MB DDR SDRAM and cable adapter
board (LVDS aux. I/O).


Please do not hesitate to drop us an email at voltrium@voltrium.com.sg or simply call us at +65 6694 6278 for more assistance.