 |
Rapixo CXP is a new generation of frame grabbers, supporting version 2.0 of the CoaXPress® (CXP) digital interface standard for machine vision applications. The Rapixo CXP family supports data rates of either up to 6.25 Gbps (CXP-6) or up to 12.5 Gbps (CXP-12). |
|---|
- Support for the highest speeds available in CXP 2.0
- Connect to and capture from up to four cameras or combine connections for even higher data rates
- PoCXP support simplifies cabling between cameras and vision computer
- Offload host computer of custom image processing using a FPGA device
- Auxiliary I/Os per CXP connection to synchronize with sensors, encoders, and controllers
- Simplify application development using the Matrox Imaging Library (MIL) software development kit (SDK)
- License fingerprint for MIL software avoids the need for a separate hardware key
| PCIe® 2.0 x8 ¾-length single-width board |
| 4GB SDRAM memory |
| Analog (RGB, Y/C and CVBS), single-link DVI (via HDMI), DisplayPort 1.2, HDMI and SDI (12G) video acquisition |
| Eight (8) independent video acquisition paths through – two (2) USB Type C connectors (via custom DVI-I adaptor cable) for analog – two (2) Mini DisplayPort connectors – four (4) HDMI Type C connectors – two (2) HD-BNC connectors |
| Multi-stream (path) video acquisition at up to 4 GB/s (4096 MB/s) combined bandwidth |
| Onboard video pre-processing: scaling, compositing and de-interlacing |
| Onboard H.264 encoding (baseline to high 4:4:4 predictive profile5) pre-licensed for MIL |
| MIL license fingerprint and storage |
| Hardware | |||
|---|---|---|---|
| Model | Matrox Rapixo CXP Single/Dual | Matrox Rapixo CXP Quad | Matrox Rapixo CXP Quad Data Forwarding |
| Host Interface | |||
| Interconnect | PCIe 2.1/3.1 x4 | PCIe 2.1/3.1 x8 | PCIe 3.1 x8 |
| Camera/Video Interface | |||
| Standard | CXP version 2.0 | ||
| Configuration | One (1) or two (2) input connection(s) | Four (4) input connections | Four (4) input connections and four (4) output connections |
| Speeds | 1.25 / 2.5 / 3.125 / 5 / 6.25 / 10 / 12.5 Gbps (CXP-1, 2, 3, 5, 6, 10, and 12 respectively) | ||
| Streams | Up to eight (8) total | ||
| Connectors | High-Density BNC | ||
| Power Output | PoCXP | ||
| Miscellaneous | Connection-status indicator LEDs for inputs | ||
| Memory | |||
| Type | DDR3 SDRAM | DDR4 SDRAM | |
| Quantity | 1 or 2 GB | 4 or 8 GB | 4 GB |
| Purpose | Image buffering and processing | ||
| Image Processing Capabilities | |||
| Onboard Look-up Tables | 8-/10-/12-bit support | ||
| Onboard Bayer Interpolation | GB, BG, GR, and RG pattern support | ||
| Onboard Color Space Conversion | Input formats: 8-/16-bit mono/Bayer, 24-/48-bit packed BGR Output formats: 8-/16-bit mono, 24-/48-bit packed/planar BGR, 16-bit YUV, 16-bit YCbCr, 32-bit BGRa |
||
| Custom Processing | N/A | Matrox Imaging- or user-developed using Xilinx Vivado® Design Suite and Matrox FDK | N/A |
| I/Os | |||
| Types |
Three (3) TTL I/Os per connector Two (2) LVDS inputs per connector One (1) LVDS output per connector Two (2) opto-isolated inputs per connector |
||
| Connectors | One (1) HD15 connector on main I/O bracket | Two (2) mDP connectors on main I/O bracket accessed through a mDP-to-HD15 adaptor | |
| Two (2) HD15 connectors on secondary I/O bracket | |||
| Physical | |||
| Form Factor | Half-length, full-height, PCIe add-in card | ||
| Dimensions (L x W x H) | 16.76 x 11.12 x 1.871 cm (6.6 x 4.376 x 0.737 in) | ||
| Environmental | |||
| Operating Temperature | 0°C to 55°C (32°F to 131°F) | ||
| Relative Humidity | Up to 95% (non-condensing) | ||
| Certifications | |||
| Electromagnetic Compatibility |
FCC Class A CE Class A (EN55032, EN55024) ICES-003 / NMB-003 Class A RCM Class A KC Class A |
||
| Software | |||
| Compatible Software |
MIL X Matrox Design Assistant X GenICam™ GenTL version 1.5 |
||
| Operating System Support |
Windows 7 (64-bit) Windows 10 (64-bit) Linux (64-bit) (Note: MIL X only.) |
||
| Licensing Provisions | MIL X license fingerprint and storage | ||
Ordering Information
| Part Number | Description |
|---|---|
| RAP4G4C6 | Rapixo CXP quad CXP-6 PCIe 2.1 x8 frame grabber with 4GB and passive heatsink. Includes one (1) mDP-to-HD15 GPIO cable adaptor. Note: Cable adaptors for second, third, and fourth GPIOs sold separately. |
| RAP8G4C12P602 | Rapixo CXP Pro quad CXP-12 PCIe 3.1 x8 frame grabber with 8 GB, XCKU060 FPGA, and fansink. Includes one (1) mDP-to-HD15 GPIO cable adaptor. Note: Cable adaptors for second, third, and fourth GPIOs sold separately. |
| RAP4G4C12 | Rapixo CXP quad CXP-12 PCIe 3.1 x8 frame grabber with 4GB and passive heatsink. Includes one (1) mDP-to-HD15 GPIO cable adaptor. Note: Cable adaptors for second, third, and fourth GPIOs sold separately. |
| RAP2G2C12 | Rapixo CXP dual CXP-12 PCIe 3.1 x4 frame grabber with 2GB and passive heatsink. Note: Cable adaptors for second and third GPIOs sold separately. |
| RAP1G1C12 | Rapixo CXP single CXP-12 PCIe 2.1 x4 frame grabber with 1GB DDR3 and passive heatsink. Note: Cable adaptors for second and third GPIOs sold separately. |
| RAP8G4C12P352 | Rapixo CXP Pro quad CXP-12 PCIe 3.1 x8 frame grabber with 8 GB, XCKU035 FPGA, and fansink. Includes one (1) mDP-to-HD15 GPIO cable adaptor. Note: Cable adaptors for second, third, and fourth GPIOs sold separately. |
| RAP4G4C12DF | Rapixo CXP quad data forwarding CXP-12 PCIe 3.1 x8 frame grabber with 4GB and passive heatsink. Includes one (1) mDP-to-HD15 GPIO cable adaptor. Note: Cable adaptors for second, third, and fourth GPIOs sold separately. |
| RAP4G4C6X4 | Matrox Rapixo CXP quad CXP-6 PCIe 3.1 x4 frame grabber with 4 GB DDR4 SDRAM and passive heatsink. Includes one (1) mDP-to-HD15 GPIO cable adaptor. Note: Cable adaptors for second, third, and fourth GPIOs sold separately. |