 |
Multi-port Gigabit Ethernet network interface cards (NICs) with Power-over-Ethernet (PoE) support and pre-licensed for acquisition using GigE Vision within Matrox Imaging software. |
|---|
Concord PoE is a new generation of Gigabit Ethernet adaptors for interfacing one or more GigE Vision® cameras supporting Power-over-Ethernet (PoE). Available with two or four Gigabit Ethernet ports, these network interface cards (NICs) simplify system configuration, not only by handling command and streaming protocols but also providing power over a single standard Cat 5e/6 cable per camera connection. An isolated PoE implementation protects cameras, board, and host computer from damage due to electrical faults and stray current that adversely affects camera detection.
Concord PoE also provides—as an option—a useful Trigger-over-Ethernet (ToE) capability for multiple cameras working together. The hardware-assisted ToE capability allows the sending of a software trigger or an action-command to one or more cameras based on an external input event. The ToE applies to camera(s) on the same or multiple Ethernet ports for a given trigger event. Moreover, this ToE feature helps reduce trigger latency and remove jitter brought on by a non-deterministic host environment.
- Simplify cabling between cameras and vision computer through PoE support
- Facilitate multi-camera configurations with two or four Gigabit Ethernet ports
- Trigger multiple cameras simultaneously and reliably using hardware-assisted ToE
- Synchronize to automation devices in real-time through digital I/Os with hardware-assisted management
- Deploy pre-licensed for GigE Vision support in Matrox Imaging software
- Avoid the need for a separate hardware key through a license fingerprint for additional Matrox Imaging software features
- Certified for use with GigE Vision systems
Hardware Specifications
| Host Interface | |
| Interconnect | PCIe® 2.1 x4 |
| Camera/Video Interface | |
| Standard | GigE Vision |
| Configuration | Two (2) or four (4) ports |
| Speeds | 10 / 100 / 1,000 Mbps |
| Controllers | Intel® Ethernet Controller I210-IT |
| Connectors | RJ-45 |
| Power Output | PoE |
| 15.4 W maximum per port | |
| Electrically isolated | |
| Source power from PCIe + 12 V rail or optionally from PC power supply via 6-pin connector | |
| General Purpose I/Os | |
| Types | Six (6) isolated inputs |
| Two (2) isolated outputs | |
| Connector | One (1) mDP connector accessed through a mDP-to-HD15 adaptor |
| Physical | |
| Form Factor | Half-length, full-height, PCIe add-in card |
| Product Dimensions | 167.65 x 111.15 x 18.7 mm (6.6 x 4.38 x 0.74 in)2 |
| Power Consumption | 4.6 W typical (excluding PoE) |
| 37.5 W maximum (from PCIe +12 V rail) | |
| 68.5 W maximum (from auxiliary 6-pin connector) | |
| Environmental | |
| Operating Temperature | 0°C to 55°C (32°F to 131°F) |
| Operating Relative Humidity | Up to 95% (non-condensing) |
| Certifications | |
| FCC Class A | |
| CE Class A (EN55011, EN61326-1 industrial environment, EN61010-1, EN61010-2-201) | |
| ICES-003 / NMB-003 Class A | |
| RCM Class A | |
| KC Class A | |
| CSA certified | |
| Software | |
| Compatible Software | MIL X4 |
| Matrox Design Assistant X4 | |
| Operating System Support | Windows 7 (325-/64-bit) |
| Windows 10 (325-/64-bit) | |
| Linux®6 | |
| Licensing Provisions | MIL X and Matrox Design Assistant X license fingerprint and storage |
Ordering Information
| Part Number | Description |
|---|---|
| CONPT4 | Concord PoE quad-port PCIe 2.1 x4 Gigabit Ethernet NIC with PoE and hardware-assisted ToE. Partially licensed for Aurora Design Assistant/Imaging Library. Note: Includes a mDP-to-HD15 cable adaptor. |
| CONP4 | Concord PoE quad-port PCIe 2.1 x4 Gigabit Ethernet NIC with PoE. Partially licensed for Aurora Design Assistant/Imaging Library. |
| CONP2 | Concord PoE dual-port PCIe 2.1 x4 Gigabit Ethernet NIC with PoE. Partially licensed for Aurora Design Assistant/Imaging Library. |
| CONPT2 | Concord PoE dual-port PCIe 2.1 x4 Gigabit Ethernet NIC with PoE and hardware-assisted ToE. Partially licensed for Aurora Design Assistant/Imaging Library. Note: Includes a mDP-to-HD15 cable adaptor. |