ARM-based industrial IoT and automation gateway
IGT-20 is an industrial grade ARM-based gateway. Unlike System on Module (SoM) that’s commonly provided as a barebone component, IGT-20 is based on AM3352 from Texas Instrument’s Sitara AM335x family and will be shipped as a ready system pre-installed with Debian. The industrial nature of IGT-20 means it is in compliance with common industrial certifications such as CE/FCC, shock and vibration. Another distinction IGT-20 has over SoM is that it accepts a wider range of power inputs ranging from 8 to 25 VDC (SoM usually accepts 5 VDC).
IGT-20 has I/Os that are applicable to a range of industrial grade sensors. It features one USB2.0, one 10/100M LAN, two configurable COM ports (RS-232/422/485) and an optional CAN bus port. In addition to the ports mentioned, there are 4 built-in isolated digital input channels that accept discrete signals from various sensors or buttons/ switches. There are also four built-in isolated digital output channels to control actuators and indicators.
Communication wise, IGT-20 has a mini PCIe slot and a USIM holder allowing it to transmit acquired data and system status via 3G, 4G or WiFi (mini PCIe WiFi module). There is an opening on top of IGT-20 for users to mount the SMA connector of the wireless module. In terms of storage, IGT-20 has dual microSDHC slots, one internal and one external. This design allows users to separate system/ user data and can expedite in OS deployment for mass production. As a gateway, users can take advantage of six programmable status LED indicators and two control buttons to operate IGT-20 without using a keyboard/ mouse.
|TI Sitara AM3352 1GHz Processor
|1GB DDR3L SDRAM
|DC Input Range
|Front-panel I/O Interface
|1x 10/100M Ethernet
|1x external T-flash socket support SDHC
|1x external SIM socket
|4-CH isolated DI and 4-CH isolated DO
|1x 3-wire RS-232
|6x user programmable LEDs
|2x user programmable buttons
|Top I/O Interface
|1x DC-input connector
|1x power button
|1x reset button
|2x Software Configurable RS-232/422/485
|1x antenna hole for WiFi and 3G/LTE
|Internal I/O Interface
|1x Full size mPCIe with USB 2.0 only
|1x internal T-flash socket support SDHC
|Debian 8 pre-installed
|41mm(W) x 77mm(D) x 104mm(H)
|-25°C ~ 70°C*
|CE/FCC Class A
* For sub-zero operating temperature, a wide temperature microSD module is required.
Industrial grade ARM-based IoT Gateway
Industrial grade ARM-based IoT gateway with 4DI, 4DO and CAN bus
Industrial grade ARM-based IoT gateway with 8DI and 8DO